Services

Many commercial businesses choose to protect their properties from burglars by installing steel roll-up doors. Although there are a wide variety of security doors available made from a myriad of materials, this type of door combines the ease of use with the invincibility of steel.

In turn, another advantage is that steel is durable, which means less maintenance costs due to daily wear and tear. This is especially important for large premises and shopping malls that have multiple entrances and therefore need more than one security gate.

At 24/7 Gate Service we believe that regardless of the size or revenue of a business, owners have the right to protect their property, their merchandise and their livelihood. For this reason, we do our best to find a solution for every customer, depending on their budget and needs.

Owners of busy and extensive businesses, such as warehouses and loading docks, are especially vulnerable to theft. Trying to secure vast areas of space by stretching a barbed wire fence from end to end will not deter thieves even in formation. Only investing in heavy-duty steel roll-up security doors in New York City and throughout the tri-state area will deter criminals. The gates installed in these businesses should be checked at least twice a year to ensure consistent operation and sustained security.

At 24/7 Gate Service we not only perform your installations, but we maintain and service all of your business doors. Customers know that by working with us, they not only get a wide selection of high-quality, guaranteed products, but they also get expert advice and the best installation. These services prevent business owners from having to pay for unnecessary maintenance and repairs in the future.

Another way we care about our customers is by closely following local laws for business owners. For example, according to recent legislation, at least 70% of the surface area covered by all rolling steel doors in New York City has to be transparent to deter vandals who graffiti doors with a completely flat surface. 24/7 Gate Service supplies gates that meet legal requirements so customers don't have to spend money on replacing gates in the future.

At 24/7 Gate Service we go the extra mile to provide our customers with the highest quality workmanship, the best materials, excellent and honest service.

The confidence that impenetrable steel gives, makes us talk about another level of security.

For more information, you can contact us by calling: (718) 514-9700

We are a company that has been a leading supplier of security gates for over 27 years, we offer some of the best and most modern roller grilles to customers in the city.

At 24/7 Gate Services we supply a wide variety of shapes and sizes. The grilles are available in different materials, such as steel, aluminum and galvanized steel, to suit different business requirements and various specifications of each property.

At 24/7 Gate Services, we understand that while security against theft and vandalism is paramount, competition is stiff and the aesthetics of a business' exterior is an important factor in success. For this reason, when designing roll-up grilles for New York businesses, we offer customers a choice of a wide variety of designs, finishes and colors. Steel grilles, for example, come with a silver, brown or black sleeve finish, while aluminum grilles come with a basic silver-colored aluminum finish, but can be powder coated in any color. 

Choosing a security door can seem overwhelming, but we help you make the right choices for any requirement, whether it's a business, home, loading dock or warehouse. 

The variety of steel rolling grilles for New York has never been greater. 

A steel rolling grille is a popular choice for all businesses.

Call (718) 514 - 9799 for more information.

Paying third parties to perform the maintenance of our gate is usually a costly task, which is not always included in our budget of common expenses. Especially when malfunctions need to be repaired. However, you can easily avoid this by performing proper maintenance on a regular basis.

Learn how easy it is to keep your gate in good condition and save yourself the hassle of having to pay large sums of money for repairs, or worse, having to buy a new gate.

Lubricate moving parts

Gates of all types are full of moving parts (some types more than others). Hinges, joints, springs, electric motor parts, sprockets, slides, gutters, all these parts can be found in the different types of gates and, being subject to constant movement, they need to be kept lubricated to avoid wear and tear.

Use anti-corrosive lubricants or industrial greases and lubricate the moving parts of your gate at least once every 3 months.

Adjust moving parts

You've probably noticed that your gate is full of nuts and bolts. Well, these screws can loosen over time and cause noise, vibration or malfunction, especially for gates that run on electric motors.

Check at least every 4 months the moving parts of your gate that are fastened with screws and tighten them if necessary (but do not overtighten them).

Avoid corrosion and rust

If your gate has many metal parts exposed to weather or moisture, it is likely to suffer from rust problems over time.

In this case, apply a coat of industrial anticorrosive primer for metal surfaces every 2 years to keep these parts protected from the effects of corrosion and rust.

Remember that rust accelerates wear and promotes the malfunction of your gate.

Be alert for signs of malfunction

An unusual noise, a momentary jamming signal at some point along the path of travel, or abnormal movement of parts may be signs of a malfunction that should be corrected quickly to avoid major problems or repair of damaged parts.

Be alert daily to the signals and behavior of your gate

If you notice that something is wrong with your gate, see an expert for proper advice to help you diagnose the problem correctly.

Check the operation of the motor

If your gate is electrically operated, check the gate's operation on a monthly basis. A normal noise level, a normal working temperature, a normal vibration level, and that the moving parts are well lubricated. Remember that the electric motor is the heart of the automatic gates.

Finally, remember to perform a general cleaning of your gate on a monthly basis, to maintain that clean, dirt-free appearance and impeccable aesthetics. It may seem like an unnecessary step, but all good maintenance starts with the basics.

All these tips we have given you will help you prevent any breakdown of your gate, maintenance is vital to be able to solve and diagnose any possible problem in time.

The security of your business is one of the aspects you are most concerned about. More often than not, this concern focuses not only on loss and property damage, but also on the feeling of vulnerability of your own family and employees. Maximum security roll-up doors provide you with the peace of mind you need to protect access to your premises.

At the same time, they perfectly combine this functionality with an elegant, customized aesthetic that fits perfectly into any design. At 24/7 Gate Service we seek to combine all these qualities in a flexible way, capable of turning any premises into a fortress without sacrificing the feeling of naturalness.

Self-closing systems

The secret of the armoring of our doors lies, as a principle, in the use of a high-strength alloy that incorporates in its composition the unquestionable armoring qualities of magnesium, silicon and titanium. In addition, the slat designs themselves are designed for maximum structural strength.

Protecting the system

This is achieved thanks to the special design of the slats, whose extrusion gives them maximum strength and allows a system in which an intermediate profile is inserted that rotates naturally when lowered, causing a perfect anchorage and sealing between the slats. Thus, the whole system becomes rigid, making it unfeasible to lift the lock by means of forcing mechanisms: turning around the axis becomes impossible.

Ultimately, the locking occurs across the entire width of each slat, reaching both sides of the door and turning the modular and flexible surface of the slats into a solid unit or block that cannot be lifted. Even with the use of powerful hydraulic systems, minimal deformation of any profile would be difficult to achieve, given its great structural strength and hardness.